Reply to thread

Message

<blockquote data-quote="karickbiz" data-source="post: 9604" data-attributes="member: 1202">Hello, &nbsp;I am trying to figure out the easiest way to glance at my hours that pertain to the ATP requirements ie: be able to look at a report (currencies or otherwise) that shows how close I am to the required hours. I think I need to use currencies but am happy to hear other options such as a custom report (which I also have not figured out how to do). As far as I can tell the currencies are limited to a time frame as well as being able to look at hours of flight. Can they look just at hours and not a time frame?&nbsp; In case you are not familiar, the requirements are as follows: 1500 Total Time and <ol>
<li data-xf-list-type="ol">500 hr. of cross-country flight time</li>
<li data-xf-list-type="ol">100 hr. of night flight time<ol>
<li data-xf-list-type="ol">A person who has performed at least 20 night takeoffs and landings to a full stop may substitute each additional night takeoff and landing to a full stop for 1 hr. of night flight time, limited to not more than 25 hr. of night flight time.</li>
</ol></li>
<li data-xf-list-type="ol">75 hr. of actual or simulated instrument flight time <ol>
<li data-xf-list-type="ol">The maximum time that may be accumulated in a flight simulator or flight training device, representing an airplane, is either<ol>
<li data-xf-list-type="ol">25 hr., if the training is not conducted under FAR Part 142, or</li>
<li data-xf-list-type="ol">50 hr., if the training is conducted under FAR Part 142.</li>
</ol></li>
</ol></li>
<li data-xf-list-type="ol">250 hr. of flight time as PIC of an airplane, or as SIC performing the duties and functions of a PIC under the supervision of a PIC, or by any combination of the two. This requirement must include:100 hr. of cross-country time AND 25 hr. of night flight time</li>
</ol>SORRY FOR THE EXTRA LONG and FUN POST!&nbsp;Rick</blockquote>

[QUOTE="karickbiz, post: 9604, member: 1202"] Hello, I am trying to figure out the easiest way to glance at my hours that pertain to the ATP requirements ie: be able to look at a report (currencies or otherwise) that shows how close I am to the required hours. I think I need to use currencies but am happy to hear other options such as a custom report (which I also have not figured out how to do). As far as I can tell the currencies are limited to a time frame as well as being able to look at hours of flight. Can they look just at hours and not a time frame? In case you are not familiar, the requirements are as follows: 1500 Total Time and [LIST=1] [*]500 hr. of cross-country flight time [*]100 hr. of night flight time[LIST=1] [*]A person who has performed at least 20 night takeoffs and landings to a full stop may substitute each additional night takeoff and landing to a full stop for 1 hr. of night flight time, limited to not more than 25 hr. of night flight time.[/LIST] [*]75 hr. of actual or simulated instrument flight time [LIST=1] [*]The maximum time that may be accumulated in a flight simulator or flight training device, representing an airplane, is either[LIST=1] [*]25 hr., if the training is not conducted under FAR Part 142, or [*]50 hr., if the training is conducted under FAR Part 142.[/LIST][/LIST] [*]250 hr. of flight time as PIC of an airplane, or as SIC performing the duties and functions of a PIC under the supervision of a PIC, or by any combination of the two. This requirement must include:100 hr. of cross-country time AND 25 hr. of night flight time[/LIST]SORRY FOR THE EXTRA LONG and FUN POST! Rick [/QUOTE]

Verification