added custom time field wont appear in spreadsheet

Bushwick

New member
Joined
May 27, 2005
Messages
4
I added 2 custom time fields to my logbook.

I went to options\ custom\ timefields

I added turbine in slot #1

I added night x.c. in slot #2

these custom fieldsdo appear in the windows style logbook but i find it very clumsy

they do not appear in the spreadsheet style logbook

i went to options\ flightlog\ config display and clicked the little boxes next to my time fields reset the spreadsheet and it still does not appear even after restarting the program and reseting the log several times


any ideas??

Cheers
Dave
 

Neal Culiner

Founder, President
Staff member
Joined
Nov 14, 2001
Messages
12,574
Location
VA
Dave,

Make sure they are not in the far right, i.e. scroll all the way over and also check that the column width of the column isn't shrunk down. If you notice the right edge of any columns are heavier then others, it's probably at minimum width. Resetting the Spreadsheet layout should resolve it. Another thing you can try. Leave the spreadsheet style entry area open, then go into options. Put a space on the end of the two custom column labels, close the Options. Then go back into the Options and remove the trailing space. See if the spreadsheet style area updates.

 

Bushwick

New member
Joined
May 27, 2005
Messages
4
Thanks!


It seems to be working not sure what did the trick but the new colums are visable on the spredsheet.





Dave
 
Top